Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
12 A-Pillar Trim Tether Clips (SUSTIPS 0812-03)
Reference number: SUSTIPS 0812-03
12 A-PILLAR TRIM TETHER CLIPS
TECHNICAL INFORMATION TECH TIPS
| SUBARU: | All Models |
SERVICE INFORMATION
When following instructions for removing the "A" pillar trim, it is necessary to cut the "tether" portion of the retaining clip. As an example, the 2010MY and later Legacy / Outback and 2012MY Impreza (except WRX & STI) Remote Engine Start (RES) kits include a replacement "A" pillar trim clip. Whenever the "A" pillar trim is removed, it is imperative to replace this clip and to not attempt to repair or reuse it as the design of the clip is important for smooth operation of the air bag. The clip is designed to "catch" the trim piece during an airbag deployment, keeping it from coming free and hitting the vehicle occupant(s) in the event of a crash.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.