Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2010IMPREZA 2.5I, 4D SEDAN, AUTOMATICREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESLAN SYSTEM (DIAGNOSTICS) (EXCEPT STI)SUBARU SELECT MONITOROPERATIONCLEAR MEMORY MODE
2010 Subaru Impreza 2.5i, 4D Sedan, Automatic
Clear Memory Mode
2010 Subaru Impreza 2.5i, 4D Sedan, AutomaticSECTION Clear Memory Mode
- On «Main Menu» display, select {Each System Check}.
- On «System Selection Menu» display, select {Integ. unit mode}.
- Press the [OK] key after the information of body integrated unit type is displayed.
- On «Integ. unit mode failure diag» display, select {Clearing Memory} and press the [OK] key.DTC CHART
Display Contents to be monitored Clear Memory? Clear function of DTC and freeze frame data - When "Done" is shown on the display screen, turn the ignition switch to OFF.
NOTE:
For details concerning the operation procedure, refer to "PC application help for Subaru Select Monitor".
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.