Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBâ—Ź LIVE
HOMESERVICE MANUALSSUBARU2007OUTBACK LIMITED, 4D SEDAN, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)BRAKESTRACTION CONTROLVEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS)SUBARU SELECT MONITOROPERATIONCLEAR MEMORY MODE
2007 Subaru Outback Limited, 4D Sedan, Standard
Clear Memory Mode
2007 Subaru Outback Limited, 4D Sedan, StandardSECTION Clear Memory Mode
- On the «Main Menu» display screen, select the {2. Each System Check}.
- On the «System Selection Menu» display screen, select the {Brake Control}.
- Select the [OK] after {VDC} is displayed.
- On the «Brake Control Diagnosis» display screen, select the {Clear Memory}.BRAKE CONTROL DIAGNOSIS DISPLAY SCREEN REFERENCE
Display Contents to be monitored Clear Memory? DTC deleting function - When "Done" and 'Turn ignition switch to OFF" are shown on the display screen, turn the ignition switch to OFF and close the Subaru Select Monitor.NOTE: For details concerning operation procedures, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL".
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.