Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBâ—Ź LIVE
HOMESERVICE MANUALSSUBARU2007OUTBACK LIMITED, 4D SEDAN, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)BRAKESTRACTION CONTROLANTI-LOCK BRAKE SYSTEM (ABS) (DIAGNOSTICS)SUBARU SELECT MONITOROPERATIONCLEAR MEMORY MODE
2007 Subaru Outback Limited, 4D Sedan, Standard
Clear Memory Mode
2007 Subaru Outback Limited, 4D Sedan, StandardSECTION Clear Memory Mode
- On the «Main Menu» screen, select {2. Each System Check}.
- On the «System Selection Menu» display screen, select the {Brake Control}.
- Select the [OK] after {ABS} is displayed.
- On the «Brake Control Diagnosis» display screen, select {Clear Memory}.DISPLAY AND CONTENT CHART
Display Contents to be monitored Clear Memory? DTC deleting function - When "Done" and "Turn ignition switch to OFF" are shown on the display screen, turn the ignition switch to OFF and close the Subaru Select Monitor.NOTE: For details concerning operation procedures, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL".
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.