Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSSUBARU2007OUTBACK LIMITED, 4D SEDAN, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTEXTERIOR LIGHTSLIGHTING SYSTEMTRUNK ROOM LIGHTINSPECTIONTRUNK LID SWITCH (TRUNK ROOM LIGHT SWITCH)

2007 Subaru Outback Limited, 4D Sedan, Standard

Trunk Lid Switch (Trunk Room Light Switch)

2007 Subaru Outback Limited, 4D Sedan, StandardSECTION Trunk Lid Switch (Trunk Room Light Switch)

Measure the resistance between trunk lid switch terminals.

Fig 1: Identifying Trunk Lid Switch Connector Terminals (Trunk Room Light Switch)

Courtesy of SUBARU OF AMERICA, INC.

TRUNK LID POSITION TERMINAL REFERENCE CHART

Trunk lid position	Terminal No.	Standard
Close	1 and 3	1 MΩ or more
Open	1 and 3	1.5 ± 0.5 Ω

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.