Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2007FORESTER F4-2.5L DOHC TURBOREPAIR AND DIAGNOSISBODY AND FRAMEBODY CONTROL SYSTEMSDESCRIPTION AND OPERATIONFAULT DETECTIONSUBARU SELECT MONITOR
2007 Subaru Forester F4-2.5L DOHC Turbo
Subaru Select Monitor
2007 Subaru Forester F4-2.5L DOHC TurboSECTION Subaru Select Monitor
SUBARU SELECT MONITOR
READING DIAGNOSTIC TROUBLE CODES
- Diagnostic trouble codes can be read with a Subaru select monitor set in its body integrated unit mode.
READING CURRENT DATA
- Use a Subaru select monitor to read analog and digital data. (Confirm necessary items when customizing.)
MEMORY CLEAR MODE
- Use a Subaru select monitor to erase diagnostic trouble codes.
CUSTOMIZING (SETTING FUNCTIONS)
- Use a Subaru select monitor to perform detailed setting of body control related functions.
- When replacing immobilizer related components, registration of the immobilizer may be necessary. (Refer to the immobilizer registering manual.)
CAUTION: When customizing, do not change the factory mode resetting function to factory mode. If you do this, settings stored in the body integrated unit will be reset to initial values and the unit will not operate normally. In this case, perform registration of the body integrated unit from the very beginning.
READING DIAGNOSTIC TROUBLE CODES
- Diagnostic trouble codes can be read with a Subaru select monitor set in its body integrated unit mode.
READING CURRENT DATA
- Use a Subaru select monitor to read analog and digital data. (Confirm necessary items when customizing.)
MEMORY CLEAR MODE
- Use a Subaru select monitor to erase diagnostic trouble codes.
CUSTOMIZING (SETTING FUNCTIONS)
- Use a Subaru select monitor to perform detailed setting of body control related functions.
- When replacing immobilizer related components, registration of the immobilizer may be necessary. (Refer to the immobilizer registering manual.)
CAUTION: When customizing, do not change the factory mode resetting function to factory mode. If you do this, settings stored in the body integrated unit will be reset to initial values and the unit will not operate normally. In this case, perform registration of the body integrated unit from the very beginning.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.