SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2005OUTBACK I, STANDARDREPAIR AND DIAGNOSISENGINE PERFORMANCETESTING & DIAGNOSISENGINE CONTROLS - ENGINE (DIAGNOSTICS) (H4SO)COMPULSORY VALVE OPERATION CHECK MODEOPERATION
2005 Subaru Outback i, Standard

Compulsory Valve Operation Check Mode: Operation

2005 Subaru Outback i, StandardSECTION Operation
  1. Prepare the Subaru Select Monitor kit. < Ref. to , PREPARATION TOOL , General Descriptions. >
    Fig 1: Subaru Select Monitor Kit
    G03828423Courtesy of SUBARU OF AMERICA, INC.
  2. Connect the diagnosis cable to Subaru Select Monitor.
  3. Insert the cartridge to Subaru Select Monitor. < Ref. to , PREPARATION TOOL , General Descriptions. >
    Fig 2: Inserting Cartridge To Subaru Select Monitor
    G03828424Courtesy of SUBARU OF AMERICA, INC.
  4. Connect the test mode connector (A) located at the lower portion of glove box.
    Fig 3: Connecting Test Mode Connector
    G03828425Courtesy of SUBARU OF AMERICA, INC.
  5. Connect the Subaru Select Monitor to data link connector located in the lower portion of instrument panel (on the driver's side).
    Fig 4: Connecting Subaru Select Monitor To Data Link Connector
    G03828426Courtesy of SUBARU OF AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.