Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSSUBARU2005OUTBACK I, STANDARDREPAIR AND DIAGNOSISENGINE MECHANICALCOOLING SYSTEM (MECHANICAL)COOLING SYSTEM (H4SO)RADIATOR SUB FAN AND FAN MOTORDISASSEMBLY

2005 Subaru Outback i, Standard

Radiator Sub Fan and Fan Motor: Disassembly

2005 Subaru Outback i, StandardSECTION Disassembly

Remove the clip which holds the fan motor connector onto shroud.
Remove the nut which holds fan onto the fan motor and shroud assembly.

Fig 1: Removing Nut From Fan Onto Fan Motor And Shroud Assembly
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolts which install fan motor onto the shroud.

Fig 2: Removing Bolts From Fan Motor Onto Shroud
Courtesy of SUBARU OF AMERICA, INC.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.