Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSSUBARU2005OUTBACK I, STANDARDREPAIR AND DIAGNOSISENGINE MECHANICALCOOLING SYSTEM (MECHANICAL)COOLING SYSTEM (H4SO)RADIATOR MAIN FAN AND FAN MOTORDISASSEMBLY

2005 Subaru Outback i, Standard

Radiator Main Fan and Fan Motor: Disassembly

2005 Subaru Outback i, StandardSECTION Disassembly

Remove the clip which holds motor connector onto the shroud.
Remove the nut which holds the fan onto fan motor and shroud.

Fig 1: Removing Nut Which Holds Fan Onto Fan Motor And Shroud
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolts which install fan motor onto the shroud.

Fig 2: Removing Bolts From Fan Motor Onto Shroud
Courtesy of SUBARU OF AMERICA, INC.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.