SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2005OUTBACK I, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)DRIVELINES & AXLESDIFFERENTIALS & DRIVE AXLESDIFFERENTIALSGENERAL DESCRIPTIONSPECIFICATIONCLASSIFICATION
2005 Subaru Outback i, Standard

Differentials & Drive Axles: Differentials: General Description: Specification: Classification

2005 Subaru Outback i, StandardSECTION Classification

Identification label positions are shown in Fig 1, for (T-Type), Fig 2, for (VA1-Type) & Fig 3, for (VA2-Type) . For details concerning identification, refer to IDENTIFICATION , General Info.

  • T-type
Fig 1: Locating Identification Label Positions (T-Type)
G03832406Courtesy of SUBARU OF AMERICA, INC.
  • VA1-type
Fig 2: Locating Identification Label Positions (VA1-Type)
G03832407Courtesy of SUBARU OF AMERICA, INC.
  • VA2-type
Fig 3: Locating Identification Label Positions (VA2-Type)
G03832408Courtesy of SUBARU OF AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.