SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2004OUTBACK LIMITED, 4D SEDAN, EJ259REPAIR AND DIAGNOSISBRAKESTRACTION CONTROLANTI-LOCK BRAKE CONTROL SYSTEM - VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS)SUBARU SELECT MONITOROPERATIONREAD CURRENT DATA
2004 Subaru Outback Limited, 4D Sedan, EJ259

Read Current Data

2004 Subaru Outback Limited, 4D Sedan, EJ259SECTION Read Current Data
  1. On the << Main Menu >> display screen, select {Each System Check} and press the << YES >> key.
  2. On the << System Selection Menu >> display screen, select {Brake Control System} and press << YES >> key.
  3. Press the << YES >> key after the VDC type is displayed.
  4. On the << Brake Control Diagnosis >> display screen, select {Current Data Display & Save} and press the << YES >> key.
  5. On the << Data Display Menu >> display screen, select {Data Display} and press the << YES >> key.
  6. Using the scroll key, move the display screen up or down until the desired data is shown.
  • A list of the support data is shown in Fig 1 .
    Fig 1: Reading Current Data Chart
    G00868174Courtesy of SUBARU OF AMERICA, INC.
NOTE: For detailed operation procedure, refer to the Subaru Select Monitor Operation Manual.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.