Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2004OUTBACK LIMITED, 4D SEDAN, EJ259REPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTCRUISE CONTROL SYSTEMSCRUISE CONTROL SYSTEMCRUISE CONTROL COMMAND SWITCHINSPECTION
2004 Subaru Outback Limited, 4D Sedan, EJ259
Cruise Control Command Switch: Inspection
2004 Subaru Outback Limited, 4D Sedan, EJ259SECTION Inspection
Measure cruise control command switch resistance.
Check continuity between cruise control command switch terminals.
TERMINAL SELECTOR POSITION CHART
| Switch | Position | Terminal No. | Standard |
|---|---|---|---|
| CANCEL | ON | 1 (+) and 2 (-) | Less than 1 ohm |
| ON | 1 (+) and 3 (-) | Less than 1 ohm | |
| SET/COAST | OFF | 1 and 2 | More than 1 ohm |
| ON | 1 and 2 | Less than 1 ohm | |
| RESUME/ACCEL | OFF | 1 and 3 | More than 1 ohm |
| ON | 1 and 3 | Less than 1 ohm |
If NG, replace cruise control command switch.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.