Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSSUBARU2004OUTBACK LIMITED, 4D SEDAN, EJ259REPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALCOOLING FANENGINE COOLING SYSTEM (H4SO)RADIATOR SUB FAN AND FAN MOTORASSEMBLY

2004 Subaru Outback Limited, 4D Sedan, EJ259

Radiator Sub Fan And Fan Motor: Assembly

2004 Subaru Outback Limited, 4D Sedan, EJ259SECTION Assembly

Assemble in the reverse order of disassembly.

Tightening torque:
4.4 N.m (0.45 kgf/m, 3.3 ft-lb)

Fig 1: Installing Fan Motor With Bolt

G00897528

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:
3.4 N.m (0.35 kgf-m, 2.5 ft-lb)

Fig 2: Installing Fan With Bolt

G00897529

Courtesy of SUBARU OF AMERICA, INC.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.