Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2004BAJA BASE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 20 (AIR BAG RESTRAINT SYSTEMS)TORQUE SPECIFICATIONS
2004 Subaru Baja Base, Standard
Torque Specifications
2004 Subaru Baja Base, StandardSECTION Torque Specifications
WARNING: This page is about a different car, the 2003 Subaru Outback, 2003 Subaru Legacy, and 2003 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| Air bag control module Torx bolts | (1)18 (25) | |||
| Front seat | ||||
| Mounting bolts | 39 (53) | |||
| Seat back bolts | 22 (30) | |||
| Front subsensor bolts | 15 (20) | |||
| Seat belt pretensioner | ||||
| Adjuster bolts | 22 (30) | |||
| Upper & lower bolts | 22 (30) | |||
| Steering wheel nut | 37 (50) | |||
| INCH Lbs. (N.m) | ||||
| Combination switch screw | 27 (3.0) | |||
| Driver-side air bag module bolts | (1)88 (9.9) | |||
| Seat belt pretensioner retaining screw | 66 (7.5) | |||
| Side impact air bag sensor Torx nuts | (1)65 (7.4) | |||
| Passenger-side air bag module bolts | 65 (7.4) | |||
|
||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.