Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2004BAJA BASE, STANDARDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTANTI-THEFT SYSTEMSSECURITY AND LOCKSSECURITY SYSTEMINSPECTIONSYMPTOM CHART
2004 Subaru Baja Base, Standard
Symptom Chart
2004 Subaru Baja Base, StandardSECTION Symptom Chart
SYMPTOM CHART
| Symptom | Repair order | Reference | ||
|---|---|---|---|---|
| 1 | Security system cannot be set. | 1. Check the transmitter function. | < Ref. to CHECK TRANSMITTER BATTERY AND FUNCTION . > | |
| 2. Check the fuse. | < Ref. to CHECK FUSE . > | |||
| 3. Check the security control module power supply and ground circuit. | < Ref. to CHECK POWER SUPPLY AND GROUND CIRCUIT . > | |||
| 4. Check the door switch. | < Ref. to CHECK DOOR SWITCH . > | |||
| 5. Replace the security control module. | < Ref. to SECURITY CONTROL MODULE . > | |||
| 2 | Security system can be set, but the security indicator light or hazard light does not blink. | Security indicator light | Check the security indicator light circuit. | < Ref. to CHECK SECURITY INDICATOR LIGHT CIRCUIT . > |
| Hazard light | Check the hazard light operation. | < Ref. to CHECK HAZARD LIGHT OPERATION . > | ||
| 3 | Security system does not alarm when one of the door is opened. | Check the door switch. | < Ref. to CHECK DOOR SWITCH . > | |
| 4 | Security alarm does not activate. | All functions | Check the door switch. | < Ref. to CHECK DOOR SWITCH . > |
| Security indicator light | Check the security indicator light circuit. | < Ref. to CHECK SECURITY INDICATOR LIGHT CIRCUIT . > | ||
| Security horn | Check the security horn. | < Ref. to CHECK SECURITY HORN . > | ||
| Hazard light | Check the hazard light operation. | < Ref. to CHECK HAZARD LIGHT OPERATION . > | ||
| Starter motor deactivation | Check the interrupt relay circuit. | < Ref. to CHECK INTERRUPT RELAY CIRCUIT . > | ||
| 5 | Security system cannot be canceled. | Transmitter | Check the transmitter function. | < Ref. to CHECK TRANSMITTER BATTERY AND FUNCTION . > |
| Ignition switch | Check the ignition switch circuit. | < Ref. to CHECK IGNITION SWITCH CIRCUIT . > | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.