Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU1999LEGACY L SEDAN AWD F4-2.2L SOHCREPAIR AND DIAGNOSISBODY AND FRAMEFRAMECROSS-MEMBERSPECIFICATIONS
1999 Subaru Legacy L Sedan AWD F4-2.2L SOHC
Cross-Member: Specifications
1999 Subaru Legacy L Sedan AWD F4-2.2L SOHCSECTION Specifications
TORQUE SPECIFICATIONS
Front:
Mounting Nuts 98 ± 15 Nm (72 ± 11.0 ft. lbs.)
Jack-Up Plate Bolts 18 ± 5 Nm (13 ± 3.6 ft. lbs.)
Rear:
Mounting Bolts 127 ± 20 Nm (94 ± 14 ft. lbs.)
Lower Reinforcement Bolts 25 ± 7 Nm (18.1 ± 5.1 ft. lbs.)
Front:
Mounting Nuts 98 ± 15 Nm (72 ± 11.0 ft. lbs.)
Jack-Up Plate Bolts 18 ± 5 Nm (13 ± 3.6 ft. lbs.)
Rear:
Mounting Bolts 127 ± 20 Nm (94 ± 14 ft. lbs.)
Lower Reinforcement Bolts 25 ± 7 Nm (18.1 ± 5.1 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.