Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSSUBARU1994LEGACY L, 4D SEDAN, FWD, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEPOWER WINDOWSCOMPONENT TESTINGPOWER WINDOW SWITCH

1994 Subaru Legacy L, 4D Sedan, FWD, Standard

Power Window Switch

1994 Subaru Legacy L, 4D Sedan, FWD, StandardSECTION Power Window Switch

Remove control switch from door panel. Using ohmmeter, check continuity of switch. For switch terminal identification, seeFig 1 or Fig 3 . Replace appropriate switch as necessary if switch continuity is not as specified. SeeFig 2 or Fig 4 .

Fig 1: Power Window Main Switch Connector Terminals

Courtesy of SUBARU OF AMERICA, INC.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.