Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Carbureted Models
The anti-afterburning system prevents the temporary heavy concentration of the air-fuel mixture during rapid deceleration by introducing air into the intake manifold. This prevents afterburning in the exhaust system.
During constant speed running, the valve is closed because pressure in chambers "A" and "B" are equal. During deceleration, with throttle closed, the vacuum pressure in the intake manifold increases and the pressure in chamber "B" decreases. The diaphragm is forced down to open the valve. This permits fresh air to be drawn into the intake manifold through the filter.
After deceleration, pressure in chamber "A" gradually becomes equal to pressure in chamber "B" as air flows through the orifice. The diaphragm is then pushed up by the spring, which closes the valve. See Fig 1 .
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.