Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSMART2012FORTWO ELECTRIC DRIVE, 2D COUPEREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALBODY ELECTRICALELECTRICAL SYSTEM, EQUIPMENT & INSTRUMENTS - 451 CHASSISBASIC KNOWLEDGEOVERVIEW OF SYSTEM COMPONENTS, INSTRUMENT CLUSTER (IC) COMPONENT DESCRIPTION - GF54.30-P-9996MCC
2012 Smart Fortwo Electric Drive, 2D Coupe
Overview of system components, instrument cluster (IC) component description - GF54.30-P-9996MCC
2012 Smart Fortwo Electric Drive, 2D CoupeSECTION Overview of system components, instrument cluster (IC) component description - GF54.30-P-9996MCC
MODEL 451.3/4 (except 451.391/491)
| Instrument cluster, component description | A1 * not for USA |
GF54.30-P-6000MCC | |
| * for USA only | GF54.30-P-6000MCU | ||
| Outside air temperature sender component description | B14 | GF83.57-P-4000MCC | |
| Component description for restraint system control unit | N2/7 * not for USA |
GF91.60-P-4048MCC | |
| * for USA only | GF91.60-P-4048MCU | ||
| CDI control unit, component description | N3/9 On Engine 660.9 * not for USA |
GF07.16-P-6000MCC | |
| ME-SFI [ME] control unit, component description | N3/10 On Engine 132.9 * not for USA |
GF07.61-P-6000MCC | |
| On Engine 132.9 * for USA only |
GF07.61-P-6000MCU | ||
| SAM control unit, component description | N10/10 * not for USA |
GF54.21-P-4157MCC | |
| * for USA only | GF54.21-P-4157MCU | ||
| Electronic selector lever module control unit | N15/5 On model 451.390/490 |
GF26.19-P-1004ED | |
| Component description for automated manual transmission control unit | N15/6 Transmission 717.480/481/483 * not for USA |
GF26.19-P-1010MCC | |
| Transmission 717.482 * for USA only |
GF26.19-P-1010MCU | ||
| Component description for ESP control unit | N47-5 * not for USA |
GF42.45-P-5118MCC | |
| * for USA only | GF42.45-P-5118MCU | ||
| Electric steering control unit, component description | N68 With code (V26) Power steering EPS (FFO) * not for USA |
GF46.35-P-7100MCC | |
| With code (V26) Power steering EPS (FFO) * for USA only |
GF46.35-P-7100MCU | ||
| Component description for battery management system control unit | N82/2 | GF54.10-P-3012ED | |
| Tire pressure monitor control unit, component description | N88 * for USA only |
GF40.15-P-5124MCU | |
| Drivetrain control unit component description | N127 On model 451.390/490 |
GF08.20-P-5001ED | |
| Starter-alternator control unit, component description | N129 On model 451.334/380/480 |
GF54.21-P-4190MCC | |
| Power electronics control unit | N129/1 On model 451.390/490 |
GF08.20-P-1001ED | |
| Table of contents for function description of instrument cluster (IC) | GF54.30-P-0997MCC |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.