Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Open In CAN Main Bus Line
2006 Scion xB L4-1.5L (1NZ-FE)SECTION Open In CAN Main Bus Line
Open in CAN Main Bus Line
DESCRIPTION
The CAN main bus line and DLC3 sub bus line may be disconnected when the resistance between terminals 6 (CANH) and 14 (CANL) of the DLC3 is 69 or higher.
INSPECTION PROCEDURE
DESCRIPTION
The CAN main bus line and DLC3 sub bus line may be disconnected when the resistance between terminals 6 (CANH) and 14 (CANL) of the DLC3 is 69 or higher.
Wiring Diagram:
Step 1-2:
Step 2(continued)-3:
INSPECTION PROCEDURE
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.