Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSCION2006XB L4-1.5L (1NZ-FE)REPAIR AND DIAGNOSISBODY AND FRAMEMIRRORSPOWER MIRROR SWITCHTESTING AND INSPECTION
2006 Scion xB L4-1.5L (1NZ-FE)
Power Mirror Switch: Testing and Inspection
2006 Scion xB L4-1.5L (1NZ-FE)SECTION Testing and Inspection
OUTER MIRROR SWITCH
INSPECTION
1. INSPECT OUTER MIRROR SWITCH ASSEMBLY
a. Select L on the left/right adjustment switch: Measure the resistance of the switch.
If the result is not as specified, replace the switch assembly.
b. Select R on the left/right adjustment switch: Measure the resistance of the switch.
If the result is not as specified, replace the switch assembly.
INSPECTION
1. INSPECT OUTER MIRROR SWITCH ASSEMBLY
a. Select L on the left/right adjustment switch: Measure the resistance of the switch.
If the result is not as specified, replace the switch assembly.
b. Select R on the left/right adjustment switch: Measure the resistance of the switch.
If the result is not as specified, replace the switch assembly.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.