Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSCION2006XB L4-1.5L (1NZ-FE)REPAIR AND DIAGNOSISBODY AND FRAMELOCKSKEYLESS ENTRYDESCRIPTION AND OPERATIONSYSTEM DESCRIPTION
2006 Scion xB L4-1.5L (1NZ-FE)
System Description
2006 Scion xB L4-1.5L (1NZ-FE)SECTION System Description
WIRELESS DOOR LOCK CONTROL SYSTEM
System Description
1. WIRELESS DOOR LOCK CONTROL SYSTEM DESCRIPTION
a. This system locks and unlocks the vehicle's doors remotely. The wireless door lock control system has the following features:
- The door control receiver performs the code identification process and the door control relay operates the door lock control. A serial data link is provided for communication between the door control receiver and the door control relay.
- A key ring type transmitter is used and it contains the following 3 switches: the door lock switch, door unlock switch and panic switch.
- An LED (light emitting diode) is mounted on the transmitter and illuminates when the battery is depleted.
b. The wireless door lock control system has given functions:
System Description
1. WIRELESS DOOR LOCK CONTROL SYSTEM DESCRIPTION
a. This system locks and unlocks the vehicle's doors remotely. The wireless door lock control system has the following features:
- The door control receiver performs the code identification process and the door control relay operates the door lock control. A serial data link is provided for communication between the door control receiver and the door control relay.
- A key ring type transmitter is used and it contains the following 3 switches: the door lock switch, door unlock switch and panic switch.
- An LED (light emitting diode) is mounted on the transmitter and illuminates when the battery is depleted.
b. The wireless door lock control system has given functions:
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.