Scan Tool Output Controls

2010 Saturn Vue XE, 3.5 NSECTION Scan Tool Output Controls
WARNING: This page is about a different car, the 2007 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
Scan Tool Output Controls

Scan Tool Output Control Additional Menu Selection(s) Description
Clear History Data Special Functions The object alarm module clears the park assist disable history when commanded from the scan tool.
Rear Red LED Special Functions
LED Test
The object alarm module illuminates the rear red LED when commanded ON from the scan tool.
Rear Yellow LED 1 Special Functions
LED Test
The object alarm module illuminates the rear yellow LED when commanded ON from the scan tool
Rear Yellow LED 2 Special Functions
LED Test
The object alarm module illuminates the rear yellow LED when commanded ON from the scan tool
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.