SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2010VUE XE, 3.5 NREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 506 (LIGHTING SYSTEMS)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2010 Saturn Vue XE, 3.5 N

Fastener Tightening Specifications

2010 Saturn Vue XE, 3.5 NSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2007 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Accelerator Pedal Assembly Nut 9 N.m 80 lb in
Brake Pedal Position Sensor Screw 2 N.m 18 lb in
Front Fog Lamp Assembly Screws 2 N.m 18 lb in
Headlamp Capsule Retaining Bolts 6 N.m 53 lb in
Instrument Panel Door Opening Frame Screw 2 N.m 18 lb in
License Plate Lamp Retaining Screws 2 N.m 18 lb in
Rear Auxiliary Tail Lamp Mounting Nuts 10 N.m 89 lb in
Roof Rail Rear Courtesy and Reading Lamp Screw 2 N.m 18 lb in
Tail Lamp Retaining Nuts 6 N.m 53 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.