Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Next Available Slot
2010 Saturn Vue XE, 3.5 NSECTION Next Available Slot
WARNING: This page is about a different car, the 2007 Saturn Sky. However, it is still accessible from the selected car via links, so may be relevant.
Incremental programming allows for a transmitter to be reprogrammed into the next available location without affecting the currently programmed transmitters. Previously programmed transmitters will not be erased during this procedure.
IMPORTANT:
If all 4 slots are programmed, the Invalidate All procedure will need to be performed to allow transmitter programming.
- Install a scan tool.
- Turn ON the ignition with the engine OFF.
- With the scan tool, select Body.
- Select Remote Control Door Lock Receiver (RCDLR).
- Select Module Setup.
- Select Program Key Fobs.
- Select Next Available Slot.
- Follow the scan tool on screen instructions.
- Remove the scan tool.
- Exit the vehicle. Operate all functions on transmitters to verify correct system operation.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.