SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2010VUE XE, 3.5 NREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1078 (HEATING, VENTILATION, AND AIR CONDITIONING)SPECIFICATIONSREFRIGERANT SYSTEM CAPACITIES
2010 Saturn Vue XE, 3.5 N

Refrigerant System Capacities

2010 Saturn Vue XE, 3.5 NSECTION Refrigerant System Capacities
WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Refrigerant System Capacities

Application Specification
Metric English
PAG Oil GM P/N 12378526 for United States
PAG Oil GM P/N 88900060 for Canada
Abrupt Refrigerant Loss 60 ml1 2.0 oz1
Compressor Replacement
  • The service compressor for the LY7 engine is precharged with 150 ml (5 oz) of PAG oil.
  • The service compressor for the LAT, LE5, LZ4 and LZE engines are precharged with 74 ml (2.5 oz) of PAG oil.
Condenser Replacement 30 ml2 1.0 oz2
Evaporator Replacement 45 ml2 1.5 oz2
  • Total System PAG Oil Capacity
 150 ml 5.0 oz
R-134a
  • Refrigerant Charge
 0.5 kg 1.1 lb
1 Abrupt refrigerant loss due to large leak, hose rupture, collision, or pressure relief valve opening. Conditions that allow the refrigerant to seep or bleed off over time do not cause this oil loss. Upon replacement of a component that caused a large refrigerant loss, also add the required amount of oil for the particular component.
2 If more than the specified amount of PAG oil was drained from a component, add the equal amount of oil drained.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.