SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2010VUE XE, 3.5 NREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1070 (INSTRUMENT PANEL TRIM AND CONSOLE TRIM)REPAIR INSTRUCTIONSINSTRUMENT PANEL UPPER TRIM PANEL REPLACEMENT
2010 Saturn Vue XE, 3.5 N

Instrument Panel Upper Trim Panel Replacement

2010 Saturn Vue XE, 3.5 NSECTION Instrument Panel Upper Trim Panel Replacement
WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Instrument Panel Upper Trim Panel
GM1987341Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the windshield garnish moldings. Refer to Windshield Pillar Garnish Molding Replacement .
1 Instrument Panel Upper Trim Panel Assembly
Tip: 
  1. Use a flat-bladed plastic trim tool to release the clips securing the instrument panel upper trim assembly to the instrument panel.
  2. Disconnect the electrical connections.
  3. When replacing the instrument panel upper trim panel, transfer all necessary components.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.