SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2010VUE XE, 2.4 1REPAIR AND DIAGNOSISRESTRAINTSAIR BAG, SRSSUPPLEMENTAL INFLATABLE RESTRAINT SYSTEMREPAIR INSTRUCTIONSAIRBAG VEHICLE ROLLOVER SENSOR REPLACEMENT
2010 Saturn Vue XE, 2.4 1

Airbag Vehicle Rollover Sensor Replacement

2010 Saturn Vue XE, 2.4 1SECTION Airbag Vehicle Rollover Sensor Replacement
Fig 1: View Of Inflatable Restraint Vehicle Rollover Sensor
GM1837210Courtesy of GENERAL MOTORS COMPANY
Airbag Vehicle Rollover Sensor Replacement

Callout Component Name
WARNING:

Refer to SIR Warning .

Preliminary Procedures

  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the front floor console. Refer to Front Floor Console Replacement .
  3. Remove the center floor air outlet duct. Refer to Floor Air Outlet Replacement - Center .
1 Inflatable Restraint Vehicle Rollover Sensor Nut (Qty: 3)
CAUTION:

Refer to Fastener Caution .


Tighten 
10 N.m (88 lb ft)
2 Inflatable Restraint Vehicle Rollover Sensor Assembly

Procedure

  1. Position the carpet in order to access the sensor.
  2. Disconnect the electrical connectors.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.