Installation Procedure

2009 Saturn Vue XR, 3.6 7, AWDSECTION Installation Procedure
  1. Install the liftgate window into the opening. Refer to Adhesive Installation of Liftgate WindowsΒ .
  2. Install the rear spoiler. Refer to Rear Spoiler Replacement .
  3. Install the rear window wiper arm. Refer to Rear Window Wiper Arm Replacement .
  4. Connect the liftgate window defogger electrical connectors to the bus bar.
  5. Install the liftgate trim. Refer to Liftgate Trim Panel Replacement .
  6. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  7. Close the liftgate.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.