Ignition Lock Key Transmitter Antenna Replacement - Instrument Panel

2009 Saturn Vue XR, 3.6 7, AWDSECTION Ignition Lock Key Transmitter Antenna Replacement - Instrument Panel
Fig 1: Ignition Lock Key Transmitter Antenna
GM2078979Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Remove driver side windshield garnish molding. Refer to Windshield Pillar Garnish Molding Replacement
  2. Remove remote control door lock receiver. Refer to Remote Control Door Lock Receiver ReplacementΒ 
1 Remote Control Door Lock Receiver Assembly
2 Ignition Lock Key Transmitter Antenna Assembly

Procedure

  1. Unclip antenna lower retainer from wire harness.
  2. Unclip upper antenna from windshield pillar.
  3. Attach mechanics wire to top of antenna. Pull antenna and wire through bottom of IP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.