Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2009VUE XR, 3.6 7, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSFLUIDS
2009 Saturn Vue XR, 3.6 7, AWD
Quick Lookups: Fluids
2009 Saturn Vue XR, 3.6 7, AWDSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | Gas | 7.00 OZS. | 0.2 L | PAG 46 | S | ||
| Air Cond Refrigerant | 1.65 LBS. | 0.74 KG | R-134a | S | |||
| Automatic Transmission Fluid | Trans Mfr CD 6T75/MH6 | Drain and Refill | 6.30 QTS. | 5.96 L | Automatic Transmission Fluid DEXRON VI | S | |
| Automatic Transmission Fluid | Trans Mfr CD 6T75/MH6 | Overhaul | 9.50 QTS. | 8.99 L | Automatic Transmission Fluid DEXRON VI | S | |
| Brake Fluid | N/A | N/A | DOT 3 Hydraulic Brake Fluid | S | |||
| Differential Gear Oil | Rear Axle | 0.53 QTS. | 0.5 L | SAE 75W-90 Synthetic Gear Oil | S | ||
| Engine Coolant | 3.6L Eng | 11.50 QTS. | 10.88 L | 50/50 mixture of DEX-COOL and clean, drinkable water | S | ||
| Engine Oil | 3.6L Eng | w/Filter | 5.50 QTS. | 5.2 L | API - SAE 5W-20 | Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures. | S |
| Fuel Tank | AWD | 19.20 GALS. | 72.67 L | S | |||
| Transfer Case Fluid | 0.85 QTS. | 0.8 L | SAE 75W-90 Synthetic Gear Oil | S | |||
| Windshield Washer Fluid | N/A | N/A | Optikleen Windshield Washer Fluid | When using concentrated washer fluid, follow the fluid manufacturer's instructions for adding water. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.