Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2009VUE XR, 3.6 7, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTINFOTAINMENTCELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEMDIAGNOSTIC INFORMATION AND PROCEDURESDTC B2462 (COMMUNICATION INTERFACE MODULE)CIRCUIT/SYSTEM TESTING (COMMUNICATION INTERFACE MODULE)
2009 Saturn Vue XR, 3.6 7, AWD
Circuit/System Testing (Communication Interface Module)
2009 Saturn Vue XR, 3.6 7, AWDSECTION Circuit/System Testing (Communication Interface Module)
- Disconnect the GPS antenna coax cable from the CIM.
- Ignition ON, test for 4.5-5.5 V between the CIM coax cable center conductor terminal at the module and ground.
- If not within the specified range, replace the CIM.
- Reconnect the coax cable to the CIM. Disconnect the coax cable from the GPS antenna.
- Test for 4.5-5.5 V between the coax cable center conductor and the outer shield.
- If not within the specified range, replace the coax cable.
- If all circuits test normal, replace the GPS antenna.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.