Fuse Block - Rear - Top View

2009 Saturn Astra XR, 4D Hatchback, AutomaticSECTION Fuse Block - Rear - Top View
Fig 1: Fuse Block - Rear - Top View
GM2043256Courtesy of GENERAL MOTORS CORP.
Fuse Block - Rear - Top View Usage

No. Fuse Rating Description
01 F1 25A Window Motor - Driver, and Window Motor - Passenger
02 - - Not Used
03 F3 7.5A Instrument Panel Cluster (IPC)
04 F4 5A HVAC Control Module
05-10 - - Not Used
11 F11 25A Rear Window Defogger Grid
12 F12 15A Fuse Block - Rear and Rear Window Wiper Motor
13 - - Not Used
14 F14 7.5 HVAC Control Module
15 - - Not Used
16 F16 5A Inflatable Restraint Front Passenger Presence System (PPS) Module
17 F17 5A Inside Rearview Mirror (ISRVM), Tire Pressure Module, and Windshield Outside Moisture Sensor
18 F18 5A Cruise Control Clutch Pedal Release Switch (M25), Headlamp and Panel Dimmer Switch, Instrument Panel Cluster (IPC), and Multifunction Switch - I/P
19-20 - - Not Used
21 F21 7.5A Outside Rearview Mirror - Driver, and Outside Rearview Mirror - Passenger
22 F22 20A Sunroof Shade Module
23 F23 25A Window Motor - Left Rear, and Window Motor - Right Rear
24 F24 7.5A Data Link Connector (DLC)
25-28 - - Not Used
29 F29 15A Cigar Lighter
30-33 - - Not Used
34 F34 25A Sunroof Control Module
35-37 - - Not Used
38 F38 25A Fuse Block - Rear
39 F39 15A Heated Seat Control Module - Driver
40 F40 15A Heated Seat Control Module - Passenger
41-44 - - Not Used
K1 - - Not Used
K2 K2 Relay - F11 and F21 Fuses
K3 K3 Relay - F12, F14, F16, F17, and F18 Fuses
K4 K4 Relay - F39 and F40 Fuses
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.