Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2009ASTRA XR, 4D HATCHBACK, AUTOMATICREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - ELECTRICAL CENTER VIEWS & COMPONENT AND HARNESS CONNECTOR END VIEWSCOMPONENT CONNECTOR END VIEWSVEHICLE COMMUNICATIONS INTERFACE MODULE (VCIM) - LEFT - X2
2009 Saturn Astra XR, 4D Hatchback, Automatic
Vehicle Communications Interface Module (VCIM) - Left - X2
2009 Saturn Astra XR, 4D Hatchback, AutomaticSECTION Vehicle Communications Interface Module (VCIM) - Left - X2
Vehicle Communications Interface Module (VCIM) - Left - X2
| Pin | Wire Color | Circuit No. | Function |
|---|---|---|---|
| 1 | 0.5 YE | 658 | Cellular Telephone Voice Signal |
| 2 | 0.5 YE/BN | 659 | Low Reference |
| 3-4 | - | - | Not Used |
| 5 | 0.5 BN/VT | 1132 | DLC Class 2 Serial Data |
| 6 | 0.5 YE | 710 | Class 2 Serial Data Secondary |
| 7 | - | - | Not Used |
| 8 | 0.5 BK | 5842 | Auxiliary Audio Screen 2 |
| 9 | 0.35 BU/RD | 5191 | Cellular Telephone Microphone Signal |
| 10 | 0.35 BK | 5193 | Low Reference |
| 11 | - | - | Not Used |
| 12 | 0.5 BK | 693 | Cellular Telephone Mute Signal |
Connector Part Information
|
Terminal Part Information
|
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.