SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2009ASTRA XR, 4D HATCHBACK, AUTOMATICREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - ELECTRICAL CENTER VIEWS & COMPONENT AND HARNESS CONNECTOR END VIEWSCOMPONENT CONNECTOR END VIEWSMULTIFUNCTION SWITCH - I/P
2009 Saturn Astra XR, 4D Hatchback, Automatic

Multifunction Switch - I/P

2009 Saturn Astra XR, 4D Hatchback, AutomaticSECTION Multifunction Switch - I/P
Fig 1: Multifunction Switch - I/P Connector End View
GM2039666Courtesy of GENERAL MOTORS CORP.
Multifunction Switch - I/P

Pin Wire Color Circuit No. Function
1 - - Not Used
2 0.5 BN 1650 Ground
3 0.5 BN/GY 1462 Driver Heated Seat Switch Control
4 0.5 BK/BN 1145 Tire Inflation Monitor Reset Switch Signal
5 0.5 BN/WH 682 Door Lock Lock/Unlock Signal
6 0.5 GN/WH 111 Hazard Switch Signal
7 - - Not Used
8 0.5 YE/BK 1436 Auto Switch Signal
9 0.5 BK/YE 1505 Front Passenger Heated Seat Switch Control
10 - - Not Used
11 0.5 BU/BK 234 Seat Belt Indicator Control
12 0.5 BK 1139 Run/Crank Ignition 1 Voltage
13 0.5 BK 1039 Run/Crank Ignition 1 Voltage
14 0.5 VT/BN 5968 Driver Door Lock Status Indicator Signal
15 0.5 BK/VT 1717 Hazard Switch Indicator Control
16 - - Not Used
17 0.5 YE/RD 1591 Auto LED Control
18 0.5 GY/YE 1382 LED Dimming Signal
Connector Part Information 
  • OEM: 1355348-1
  • Service: 93187174
  • Description: 18-way F MQS Series (BK)
Terminal Part Information 
  • Terminal/Tray: Service by Harness - See Part Catalog
  • Release Tool/Test Probe: N/A
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.