SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2009ASTRA XR, 4D HATCHBACK, AUTOMATICREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - ELECTRICAL CENTER VIEWS & COMPONENT AND HARNESS CONNECTOR END VIEWSCOMPONENT CONNECTOR END VIEWSINFLATABLE RESTRAINT SENSING AND DIAGNOSTIC MODULE (SDM) - X1
2009 Saturn Astra XR, 4D Hatchback, Automatic

Inflatable Restraint Sensing and Diagnostic Module (SDM) - X1

2009 Saturn Astra XR, 4D Hatchback, AutomaticSECTION Inflatable Restraint Sensing and Diagnostic Module (SDM) - X1
Fig 1: Inflatable Restraint Sensing and Diagnostic Module (SDM) - X1 Connector End View
GM2071664Courtesy of GENERAL MOTORS CORP.
Inflatable Restraint Sensing and Diagnostic Module (SDM) - X1

Pin Wire Color Circuit No. Function
1-14 - - Not Used
15 0.5 WH 3025 Passenger IP Module Stage 1 High Control
16 0.5 OG/WH 3024 Passenger IP Module Stage 1 Low Control
17 0.5 VT 3026 Passenger IP Module Stage 2 Low Control
18 0.5 OG/BK 3027 Passenger IP Module Stage 2 High Control
19-22 - - Not Used
23 0.5 OG/BK 3023 Steering Wheel Module Stage 2 High Control
24 0.5 BK 3022 Steering Wheel Module Stage 2 Low Control
25 0.5 VT 3020 Steering Wheel Module Stage 1 Low Control
26 0.5 OG/VT 3021 Steering Wheel Module Stage 1 High Control
27-28 - - Not Used
29 0.5 OG/WH 5018 Occupant Sensor Serial Data
30 0.5 OG/GY 5246 SIR Deployed Signal
31-33 - - Not Used
34 0.5 BU/BK 234 Seat Belt Indicator Control
35 0.5 GN 5060 Low Speed GMLAN Serial Data
36 - - Not Used
37 0.5 GN 5060 Low Speed GMLAN Serial Data
38 0.5 GN 5060 Low Speed GMLAN Serial Data
39-56 - - Not Used
Connector Part Information 
  • OEM: ZF56-10
  • Service: Service by Harness - See Part Catalog
  • Description: 56-Way F MX123 34576 Series (BN w/YE Lock)
Terminal Part Information 
  • Terminal/Tray: Service by Harness - See Part Catalog
  • Release Tool/Test Probe: N/A
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.