Installation Procedure

2009 Saturn Astra XR, 4D Hatchback, AutomaticSECTION Installation Procedure
  1. Install the theft deterrent module.

    Install the 2 clips.

  2. CAUTION: Refer to Fastener Caution .
  3. Install the CIM.
    • Connect and lock the wiring harness plug.
    • Connect the wiring harness holder.

      Tighten:Β  Tighten the 3 bolts to 2.5 N.m (22 lb in).

  4. Install the lower steering column panel.

    Install the ignition lock panel.

    Tighten:Β  Tighten the 5 screws to 2.5 N.m (22 lb in).

  5. Install the steering wheel. Refer to Steering Wheel Replacement .
  6. For reprogramming procedures, refer to Control Module References .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.