Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2009ASTRA XR, 4D HATCHBACK, AUTOMATICREPAIR AND DIAGNOSISBODY & FRAMEBODY, CAB CONTROL SYSTEMSDATA COMMUNICATIONSDIAGNOSTIC INFORMATION AND PROCEDURESDIAGNOSTIC CODE INDEX
2009 Saturn Astra XR, 4D Hatchback, Automatic
Diagnostic Code Index
2009 Saturn Astra XR, 4D Hatchback, AutomaticSECTION Diagnostic Code Index
DIAGNOSTIC CODE INDEX
| DTC | Description |
|---|---|
| DTC B1000 | B1000 00: Electronic Control Unit (ECU) Performance No Additional Information Available B1000 04: Side Object Detection Performance - RAM Failure B1000 08: Electronic Control Unit (ECU) Performance Signal Invalid B1000 12: Electronic Control Unit (ECU) Performance Below Minimum Threshold B1000 31: Electronic Control Unit (ECU) General Checksum Problem B1000 33: Electronic Control Unit (ECU) Performance Special Memory Failure B1000 34: Electronic Control Unit (ECU) Performance RAM Integrity B1000 35: Electronic Control Unit (ECU) Performance ROM Integrity B1000 36: Electronic Control Unit (ECU) Performance EEPROM Integrity B1000 37: Electronic Control Unit (ECU) Performance Watchdog / Safety Failure B1000 38: Electronic Control Unit (ECU) Performance Supervision Software Failure B1000 39: Electronic Control Unit (ECU) Performance Internal Electronic Failure B1000 43: Electronic Control Unit (ECU) Performance EEPROM Error B1000 46: Side Object Detection Performance - Invalid Configuration B1000 56: Electronic Control Unit (ECU) Performance Allowable Number of Transitions/ Events Exceeded B1000 57: Electronic Control Unit (ECU) Performance B1000 73: Electronic Control Unit (ECU) Performance Parity Error B1000 0F: Electronic Control Unit (ECU) Performance Erratic B1000 2B: Electronic Control Unit (ECU) Performance Missing Reference B1000 2C: Electronic Control Unit Performance Reserved B1000 3B: Electronic Control Unit (ECU) Performance Internal Self Test Failed B1000 3C: Electronic Control Unit (ECU) Performance Internal Communications Failure B1000 4A: Side Object Detection Performance - PROM Checksum Error B1000 F0: Side Object Detection RF Transmit Chain Failed B1000 F1: Side Object Detection RF Receive Chain Failed B1000 F2: Side Object Detection Frequency Calibration Failure B1000 F3: Side Object Detection Inter-Processor Communication Failed |
| DTC B1001 | B1001 00: Option Configuration Error B1001 45: Option Configuration Error Variant Not Programmed B1001 46: Option Configuration Error B1001 4B: Option Configuration Error Calibration Not Learned |
| DTC B1006 | B1006 00: Electronic Control Unit (ECU) |
| DTC B1016 | B1016 00: VIN Not Programmed |
| DTC U0100-U0299 | ** DESCRIPTION NOT COLLECTED ** |
| DTC U1500 | U1500: Graphical Interface Communication Malfunction |
| DTC U2100 | U2100 00: Controller Area Network (CAN) Bus Communication U2100 47: Controller Area Network (CAN) Bus Communication |
| DTC U2101 | Modules connected to the high and low speed GMLAN serial data circuits monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the modules. The modules have prerecorded information about what messages are needed to be exchanged on the serial data circuits, for each virtual network. The messages are supervised and also, some periodic messages are used by the receiver module as an availability indication of the transmitter module. Each message contains the identification number of the transmitter module. |
| DTC U2201 | U2201 00: Lost Communication With Entertainment Head Unit (EHU) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.