Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2009ASTRA XR, 4D HATCHBACK, AUTOMATICREPAIR AND DIAGNOSISBODY & FRAMEBODY, CAB CONTROL SYSTEMSDATA COMMUNICATIONSDESCRIPTION AND OPERATIONBODY CONTROL SYSTEM DESCRIPTION AND OPERATION (UNDERHOOD ELECTRICAL CENTER)WIPER FUNCTION
2009 Saturn Astra XR, 4D Hatchback, Automatic
Wiper Function
2009 Saturn Astra XR, 4D Hatchback, AutomaticSECTION Wiper Function
The UEC is the center of all actuated components:
- Front wiper relay
- 4 wiper stages (one-touch wipe, intermittent, slow wipe, fast wipe). If the drivers door is opened when the fast stage is selected, the wiper is automatically reset to the slow stage. This function is programmable.
- Rain/light sensor.
- Intermittent function (with rain sensor fitted).
- Wiper service position: After the ignition has been switched off and the key is in position "0", the wipers can be moved to a service position (for example to change the wipers) by actuating the wiper switch in the SCCM.
- Rear wiper.
- Windscreen wash system.
- Rear window wash system (If the washer fluid level is too low, the rear window wash system will be deactivated).
- Headlamp wash system (If the washer fluid level is too low, the headlamp wash system will be deactivated).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.