Removal Procedure

2009 Saturn Astra XR, 4D Hatchback, AutomaticSECTION Removal Procedure
    Fig 1: View Of Repeater Lamp Wiring Harness Plug
    GM1941034Courtesy of GENERAL MOTORS CORP.
  1. Remove the repeater lamp on the right side.

    Press the repeater lamp in the direction of the arrow using a plastic wedge, and remove.

  2. Disconnect the repeater lamp.

    Disconnect the wiring harness plug (1).

  3. Fig 2: View Of Repeater Lamp Wiring Harness Plug
    GM1937522Courtesy of GENERAL MOTORS CORP.
  4. Remove the repeater lamp on the left side.

    Press the repeater lamp in direction of the arrow using a plastic wedge, and remove.

  5. Disconnect the repeater lamp.

    Disconnect the wiring harness plug (1).

  6. Remove the bulb.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.