Removal Procedure

2009 Saturn Astra XR, 4D Hatchback, AutomaticSECTION Removal Procedure
    Fig 1: View Of Panel For Microphone, Sliding Sunroof Control Unit, And Lens From Interior Lamp
    GM1944541Courtesy of GENERAL MOTORS CORP.
  1. Release the panel for the microphone (2) and the panel for the sliding sunroof control unit (3).

    Release using a suitable tool (screwdriver).

  2. Remove the lens from the interior lamp (1).
  3. Fig 2: Front Interior Lamp Holder Components
    GM1941091Courtesy of GENERAL MOTORS CORP.
  4. Remove the front interior lamp holder.
    • Remove the 2 bolts (1).
    • Release the holder (4) all around.
    • Disconnect the wiring harness holder (2).
    • Disconnect the wiring harness plug (3).
  5. Fig 3: Switch With The Theft Deterrent Sensors Components
    GM1941094Courtesy of GENERAL MOTORS CORP.
  6. Remove the switch with the theft deterrent sensors.
    • Disconnect the compact plug (1).
    • Release and disconnect the wiring harness at the compact plug (arrow).
    • Disconnect and remove the panel with the theft deterrent sensors (2).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.