Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2009ASTRA XR, 2D HATCHBACK, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTHEADLIGHTSLIGHTINGDIAGNOSTIC INFORMATION AND PROCEDURESSTOP LAMPS MALFUNCTIONCIRCUIT/SYSTEM VERIFICATION
2009 Saturn Astra XR, 2D Hatchback, Automatic
Circuit/System Verification
2009 Saturn Astra XR, 2D Hatchback, AutomaticSECTION Circuit/System Verification
- Ignition ON, command the stop lamps ON and OFF with a scan tool. The stop lamps should illuminate ON and OFF when changing between the commanded states.
- If the stop lamps do not illuminate when commanded, refer to Stop Lamps Malfunction below.
- Command the stop lamps ON and OFF by applying and releasing the brake pedal. The stop lamps should illuminate ON and OFF when applying and releasing the brake pedal.
- If the stop lamps do not illuminate ON and OFF as the brake pedal is applied and released, refer to Brake Pedal Position Sensor Malfunction below.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.