Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSSATURN2009ASTRA XR, 2D HATCHBACK, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTEXTERIOR LIGHTSLIGHTINGREPAIR INSTRUCTIONSTAIL LAMP CIRCUIT BOARD REPLACEMENTREMOVAL PROCEDURE

2009 Saturn Astra XR, 2D Hatchback, Automatic

Removal Procedure

2009 Saturn Astra XR, 2D Hatchback, AutomaticSECTION Removal Procedure

Fig 1: View Of Tail Light Bolts And Wiring Harness Plug

Courtesy of GENERAL MOTORS CORP.

Remove the combined tail lamp.
- Open the access panel.
- Remove the 2 bolts (2).
- Remove the tail lamp circuit board.
- Disconnect the wiring harness plug (1).

Fig 2: View Of Tail Lamp Holder Clips

Courtesy of GENERAL MOTORS CORP.

Remove the tail lamp holder.
Release the 4 clips (1).
Transfer the necessary tail lamp components.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.