Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2007ION 3 4D SEDAN, 2.4 B, AUTOMATICREPAIR AND DIAGNOSISQUICK LOOKUPSFLUIDS
2007 Saturn Ion 3 4D Sedan, 2.4 B, Automatic
Quick Lookups: Fluids
2007 Saturn Ion 3 4D Sedan, 2.4 B, AutomaticSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 5.00 OZS. | 0.14 L | PAG 46 | S | |||
| Air Cond Refrigerant | 0.90 LBS. | 0.4 KG | R-134a | S | |||
| Automatic Transmission Fluid | Drain and Refill | 6.90 QTS. | 6.52 L | Automatic Transmission Fluid DEXRON VI | S | ||
| Automatic Transmission Fluid | Overhaul | 9.50 QTS. | 8.99 L | Automatic Transmission Fluid DEXRON VI | S | ||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Engine Coolant | 2.4L Eng | 7.20 QTS. | 6.81 L | 50/50 mixture of DEX-COOL and clean, drinkable water | S | ||
| Engine Oil | 2.4L Eng | 5.00 QTS. | 4.73 L | API - SAE 5W-30 | Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures. | S | |
| Fuel Tank | 13.50 GALS. | 51.1 L | S | ||||
| Manual Transmission Fluid | 1.70 QTS. | 1.6 L | Manual Transmission Fluid | GM Part No. 88861800. | S | ||
| Power Steering Fluid | 1.50 PTS. | 0.7 L | GM Power Steering Fluid | GM Part No. 89021184. | S | ||
| Windshield Washer Fluid | N/A | N/A | Optikleen Windshield Washer Fluid | When using concentrated washer fluid, follow the fluid manufacturer's instructions for adding water. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.