Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2005VUE 2WD V6-3.5L VIN 4REPAIR AND DIAGNOSISBRAKES AND TRACTION CONTROLANTILOCK BRAKES / TRACTION CONTROL SYSTEMSTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESSCAN TOOL DATA DEFINITIONS
2005 Saturn VUE 2WD V6-3.5L VIN 4
Scan Tool Data Definitions
2005 Saturn VUE 2WD V6-3.5L VIN 4SECTION Scan Tool Data Definitions
Scan Tool Data Definitions
Data Display/Definitions
The Scan Tool Data Display/Definitions contains a brief description of all the antilock brake system (ABS), traction control system (TCS), and vehicle stability enhancement system (VSES) data parameters. The menus available depend on the number and type of system on the vehicle and are listed below in alphanumeric order.
^ ABS DATA
^ TCS DATA
Battery Voltage
The scan tool displays 0-17 Volts. The scan tool displays the level of ignition voltage at the electronic brake control module (EBCM).
Brake Switch
The scan tool will display Applied or Released depending on the state of the brake switch.
LF Inlet Valve Solenoid Inactive
The scan tool will display Active or Inactive. The scan tool displays the commanded state of the LF inlet solenoid valve.
LF Outlet Valve Solenoid Inactive
The scan tool will display Active or Inactive. The scan tool displays the commanded state of the LF outlet solenoid valve.
Left Front Wheel Speed
The scan tool displays 0 - 255 km/h (0 - 158 mph). The scan tool displays the actual speed of the left front wheel.
LF Valve Solenoids
The scan tool will display Apply or Released. The scan tool displays the commanded state of the LF solenoid valve.
Left Rear Wheel Speed
The scan tool displays 0 - 255 km/h (0 - 158 mph). The scan tool displays the actual speed of the left rear wheel.
LR Inlet Valve Solenoid Inactive
The scan tool displays Active or Inactive. The scan tool displays the commanded state of the LR inlet solenoid valve.
LR Outlet Valve Solenoid Inactive
The scan tool displays Active or Inactive. The scan tool displays the commanded state of the LR outlet solenoid valve.
LR Valve Solenoids
The scan tool will display Apply or Released. The scan tool displays the commanded state of the LR solenoid valve.
Pump Motor Relay Command
The scan tool displays On or Off. The scan tool displays the commanded state of the pump motor relay.
Pump Motor Relay Feedback
The scan tool displays On or Off. The scan tool displays the feed back state of the pump motor relay.
RF Inlet Valve Solenoid Inactive
The scan tool displays Active or Inactive. The scan tool displays the commanded state of the RF inlet solenoid valve.
RF Outlet Valve Solenoid Inactive
The scan tool displays Active or Inactive. The scan tool displays the commanded state of the RF outlet solenoid valve.
Right Front Wheel Speed
The scan tool displays 0 - 255 km/h (0 - 158 mph). The scan tool displays the actual speed of the right front wheel.
RF Valve Solenoids
The scan tool will display Apply or Released. The scan tool displays the commanded state of the RF solenoid valve.
RR Inlet Valve Solenoid Inactive
The scan tool displays Active or Inactive - The scan tool displays the commanded state of the RR inlet solenoid valve.
RR Outlet Valve Solenoid Inactive
The scan tool displays Active or Inactive - The scan tool displays the commanded state of the RR outlet solenoid valve.
Right Rear Wheel Speed
The scan tool displays 0 - 255 km/h (0 - 158 mph). The scan tool displays the actual speed of the right rear wheel.
RR Valve Solenoids
The scan tool will display Apply or Released. The scan tool displays the commanded state of the RR solenoid valve.
Traction Switch
The scan tool displays Pressed or Released. The scan tool will display the state of the Traction Control Switch.
Traction Switch LED
The scan tool will display On or Off depending on the state of the switch (LED) indicator.
Valve Relay
The scan tool will display On/Off depending on the state of the relay.
Valve Relay State
The scan tool will display On/Off depending on the state of the relay.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.