Fastener Tightening Specifications

2005 Saturn Relay AWDSECTION Fastener Tightening Specifications
Fastener Tightening Specifications

Application Specification
Metric English
Cup Holder Screws 9 N.m 80 lb in
Finish Cover Screws 2 N.m 18 lb in
Front Seat Anchor Nuts 40 N.m 30 lb ft
Front Seat Recliner Bolts 48 N.m 35 lb ft
Lateral Release Bezel Screw 2 N.m 18 lb in
Lumbar Actuator Screws 2 N.m 18 lb in
Recliner Bolts 32 N.m 24 lb ft
Recliner Cover Screws 2 N.m 18 lb in
Riser Bolts (Bucket) 45 N.m 33 lb ft
Riser Bolts (Split Benches) 32 N.m 24 lb ft
Seat Adjuster Bolts 32 N.m 24 lb ft
Sit-N-Lift Seat - Chain Cover Screws 2 N.m 18 lb in
Sit-N-Lift Seat - Foot Rest Bolt 33 N.m 25 lb ft
Sit-N-Lift Seat - Foot Rest Cover Screws 2 N.m 18 lb in
Sit-N-Lift Seat - Lock Bolts 20 N.m 15 lb ft
Sit-N-Lift Seat - Seat Belt Anchor Bolt 43 N.m 32 lb ft
Sit-N-Lift Seat Module 2 N.m 18 lb in
Sit-N-Lift Upper and Lower Stay Bracket Bolt 50 N.m 35 lb ft
Sit-N-Lift Upper Limit Switch Bracket 5.8 N.m 50 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.