Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Ignition Switch Connector End View
2005 Saturn Relay AWDSECTION Ignition Switch Connector End View
Ignition Switch
| Connector Part Information |
|
Terminal Part Information |
|
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | L-GN | 80 | Key In Ignition Switch Signal |
| 2 | BK/WH | 1551 | Ground |
| 3 | BN | 1141 | Ignition 3 Voltage |
| 4 | WH/BK | 644 | 12-Volt Reference |
| 5 | YE | 5 | Crank Voltage |
| 6 | WH/BK | 644 | 12-Volt Reference |
| 7 | PK | 1239 | Ignition 1 Voltage |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.