Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2000SL1 L4-1.9L SOHC VIN 8REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYSYSTEM SPECIFICATIONSCYLINDER BORE SPECIFICATIONS
2000 Saturn SL1 L4-1.9L SOHC VIN 8
Cylinder Bore Specifications
2000 Saturn SL1 L4-1.9L SOHC VIN 8SECTION Cylinder Bore Specifications
| Bore Diameter (Middle) | (Bore No. 2, 3) | Standard | 3.2280-3.2287 |
| Service Limit | 3.2297 | ||
| (Bore No.1, 4) | Standard | 3.2283-3.2291 | |
| Service Limit | 3.2301 | ||
| Re-boring Limit | Standard | --- | |
| Service Limit | 0.0157 | ||
| Bore Taper | Standard | 0.0004 | |
| Service Limit | 0.0020 | ||
| Bore Out-of-Round | Standard | 0.0004 | |
| Service Limit | 0.0020 | ||
| Liner Height Depth | Standard | Flush | |
| Service Limit | +/- 0.0005 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.