Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2000SL1 L4-1.9L SOHC VIN 8REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYPISTON, ENGINE
2000 Saturn SL1 L4-1.9L SOHC VIN 8
Piston, Engine
2000 Saturn SL1 L4-1.9L SOHC VIN 8SECTION Piston, Engine
| Piston Protrusion Above Deck | Standard | 0.0118 Inch (in) |
| Service Limit | 0.0149 Inch (in) | |
| Piston Protrusion Below Deck | Standard | 0.0026 |
| Service Limit | 0.0057 | |
| Skirt Outer Diameter (at 5 mm [0.20 inch] from bottom of piston) | Standard | 3.2270 - 3.2280 Inch (in) |
| Service Limit | 3.2280 Inch (in) | |
| Cylinder Clearance (Bore 2 and3) | Standard | 0.0000 - 0.0017 Inch (in) |
| Service Limit | 0.0028 Inch (in) | |
| Cylinder Clearance (Bore 1 and 4) | Standard | 0.0003 - 0.0021 Inch (in) |
| Service Limit | 0.0028 Inch (in) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.