Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Air Cleaner Housing And Duct Assembly - SOHC (L24): Installation
2000 Saturn SL1 AutomaticSECTION Installation
- Install the air box assembly and assembly attaching screws.
Torque:
Air Cleaner/Resonator Attachment Bolts (All): 10 N.m (89 in-Ibs)
- Connect electrical connector at the Intake Air Temperature (IAT) sensor.
- Install the resonator. Insert the end of the resonator into the air box assembly opening.
- Install the resonator push in plastic fastener. Install air cleaner tube and air box cover. Attach air box clips and install clamp at throttle body.
Torque:
Throttle Body Clamp: 2 N.m (18 in-lbs)
- Connect fresh air hose to cam cover.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.